[openrtm-users 03109] Re: svn で落としてきたソースのコンパイル方法について

[Kei Okada]

ありがとうございます．便利なスクリプトがあったんですね．上手く行きました．

On Wed, Sep 17, 2014 at 8:32 AM, Geoffrey Biggs
<geoffrey.biggs ＠ aist.go.jp> wrote:
> 岡田様
>
> SVNからのビルド方法は以下のページで記述されています。
>
> http://openrtm.org/openrtm/ja/content/%E3%82%BD%E3%83%BC%E3%82%B9%E3%81%8B%E3%82%89%E3%81%AE%E3%83%93%E3%83%AB%E3%83%89-linux%E7%B7%A8
>
> 今RELENG_1_1で試し、問題なしビルドできました。（環境はGentooです。）
>
> この説明でもビルドできなかったら、リストにご連絡をお願いします。
>
> ジェフ
>
> On 17 September 2014 01:31, Kei Okada <k-okada ＠ jsk.t.u-tokyo.ac.jp> wrote:
>>
>> 岡田です．
>> svn　で落としてきたソースのコンパイル方法について，どこを参考にすればよいかご教示いただけると幸いです．
>>
>> autoconf, automake, configure としてみたのですが，以下のようなエラーになります．
>>
>> k-okada ＠ kokada-t430s:/tmp/OpenRTM-aist$ autoconf
>> configure.ac:23: error: possibly undefined macro: AM_INIT_AUTOMAKE
>>       If this token and others are legitimate, please use
>> m4_pattern_allow.
>>       See the Autoconf documentation.
>> configure.ac:24: error: possibly undefined macro: AM_CONFIG_HEADER
>> configure.ac:74: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL
>> configure.ac:75: error: possibly undefined macro: AC_PROG_LIBTOOL
>> configure.ac:76: error: possibly undefined macro: AM_WITH_DMALLOC
>> configure.ac:1370: error: possibly undefined macro: AM_CONDITIONAL
>> k-okada ＠ kokada-t430s:/tmp/OpenRTM-aist$ aclocal
>> aclocal: acinclude.m4:20: file `libtool.m4' does not exist
>> k-okada ＠ kokada-t430s:/tmp/OpenRTM-aist$ automake
>> configure.ac: no proper invocation of AM_INIT_AUTOMAKE was found.
>> configure.ac: You should verify that configure.ac invokes
>> AM_INIT_AUTOMAKE,
>> configure.ac: that aclocal.m4 is present in the top-level directory,
>> configure.ac: and that aclocal.m4 was recently regenerated (using
>> aclocal).
>> configure.ac:73: required file `./install-sh' not found
>> configure.ac:73:   `automake --add-missing' can install `install-sh'
>> examples/AutoTest/Makefile.am:76: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/AutoTest/Makefile.am:76:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> examples/AutoTest/Makefile.am:76:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> examples/AutoTest/Makefile.am:76:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/AutoTest/Makefile.am:76:   its definition is in aclocal's search
>> path.
>> examples/AutoTest/Makefile.am: required file `./depcomp' not found
>> examples/AutoTest/Makefile.am:   `automake --add-missing' can install
>> `depcomp'
>> /usr/share/automake-1.11/am/depend2.am: am__fastdepCXX does not appear in
>> AM_CONDITIONAL
>> /usr/share/automake-1.11/am/depend2.am:   The usual way to define
>> `am__fastdepCXX' is to add `AC_PROG_CXX'
>> /usr/share/automake-1.11/am/depend2.am:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> /usr/share/automake-1.11/am/depend2.am: AMDEP does not appear in
>> AM_CONDITIONAL
>> /usr/share/automake-1.11/am/depend2.am:   The usual way to define `AMDEP'
>> is to add one of the compiler tests
>> /usr/share/automake-1.11/am/depend2.am:     AC_PROG_CC, AC_PROG_CXX,
>> AC_PROG_CXX, AC_PROG_OBJC,
>> /usr/share/automake-1.11/am/depend2.am:     AM_PROG_AS, AM_PROG_GCJ,
>> AM_PROG_UPC
>> /usr/share/automake-1.11/am/depend2.am:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> examples/Composite/Makefile.am:22: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/Composite/Makefile.am:22:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> examples/Composite/Makefile.am:22:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> examples/Composite/Makefile.am:22:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/Composite/Makefile.am:22:   its definition is in aclocal's search
>> path.
>> examples/ConfigSample/Makefile.am:22: Libtool library used but `LIBTOOL'
>> is undefined
>> examples/ConfigSample/Makefile.am:22:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> examples/ConfigSample/Makefile.am:22:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> examples/ConfigSample/Makefile.am:22:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/ConfigSample/Makefile.am:22:   its definition is in aclocal's
>> search path.
>> examples/SeqIO/Makefile.am:22: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/SeqIO/Makefile.am:22:   The usual way to define `LIBTOOL' is to
>> add `LT_INIT'
>> examples/SeqIO/Makefile.am:22:   to `configure.ac' and run `aclocal' and
>> `autoconf' again.
>> examples/SeqIO/Makefile.am:22:   If `LT_INIT' is in `configure.ac', make
>> sure
>> examples/SeqIO/Makefile.am:22:   its definition is in aclocal's search
>> path.
>> examples/SimpleIO/Makefile.am:22: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/SimpleIO/Makefile.am:22:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> examples/SimpleIO/Makefile.am:22:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> examples/SimpleIO/Makefile.am:22:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/SimpleIO/Makefile.am:22:   its definition is in aclocal's search
>> path.
>> examples/SimpleService/Makefile.am:80: Libtool library used but `LIBTOOL'
>> is undefined
>> examples/SimpleService/Makefile.am:80:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> examples/SimpleService/Makefile.am:80:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> examples/SimpleService/Makefile.am:80:   If `LT_INIT' is in
>> `configure.ac', make sure
>> examples/SimpleService/Makefile.am:80:   its definition is in aclocal's
>> search path.
>> src/ext/ec/artlinux/Makefile.am:19: Libtool library used but `LIBTOOL' is
>> undefined
>> src/ext/ec/artlinux/Makefile.am:19:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> src/ext/ec/artlinux/Makefile.am:19:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> src/ext/ec/artlinux/Makefile.am:19:   If `LT_INIT' is in `configure.ac',
>> make sure
>> src/ext/ec/artlinux/Makefile.am:19:   its definition is in aclocal's
>> search path.
>> src/ext/ec/rtpreempt/Makefile.am:17: Libtool library used but `LIBTOOL' is
>> undefined
>> src/ext/ec/rtpreempt/Makefile.am:17:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> src/ext/ec/rtpreempt/Makefile.am:17:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> src/ext/ec/rtpreempt/Makefile.am:17:   If `LT_INIT' is in `configure.ac',
>> make sure
>> src/ext/ec/rtpreempt/Makefile.am:17:   its definition is in aclocal's
>> search path.
>> src/ext/sdo/observer/Makefile.am:74: Libtool library used but `LIBTOOL' is
>> undefined
>> src/ext/sdo/observer/Makefile.am:74:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> src/ext/sdo/observer/Makefile.am:74:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> src/ext/sdo/observer/Makefile.am:74:   If `LT_INIT' is in `configure.ac',
>> make sure
>> src/ext/sdo/observer/Makefile.am:74:   its definition is in aclocal's
>> search path.
>> src/lib/rtm/Makefile.am:37: Libtool library used but `LIBTOOL' is
>> undefined
>> src/lib/rtm/Makefile.am:37:   The usual way to define `LIBTOOL' is to add
>> `LT_INIT'
>> src/lib/rtm/Makefile.am:37:   to `configure.ac' and run `aclocal' and
>> `autoconf' again.
>> src/lib/rtm/Makefile.am:37:   If `LT_INIT' is in `configure.ac', make sure
>> src/lib/rtm/Makefile.am:37:   its definition is in aclocal's search path.
>> src/lib/rtm/idl/Makefile.am:19: ORB_IS_RTORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:44: ORB_IS_TAO does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:48: ORB_IS_OMNIORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:52: ORB_IS_MICO does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:56: ORB_IS_ORBIX does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:60: ORB_IS_ORBACUS does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:64: ORB_IS_ORBIT2 does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:74: ORB_IS_RTORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:190: ORB_IS_RTORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:188: Libtool library used but `LIBTOOL' is
>> undefined
>> src/lib/rtm/idl/Makefile.am:188:   The usual way to define `LIBTOOL' is to
>> add `LT_INIT'
>> src/lib/rtm/idl/Makefile.am:188:   to `configure.ac' and run `aclocal' and
>> `autoconf' again.
>> src/lib/rtm/idl/Makefile.am:188:   If `LT_INIT' is in `configure.ac', make
>> sure
>> src/lib/rtm/idl/Makefile.am:188:   its definition is in aclocal's search
>> path.
>> src/lib/rtm/tests/CORBA_SeqUtil/Makefile.am:32: ORB_IS_ORBIT2 does not
>> appear in AM_CONDITIONAL
>> src/lib/rtm/tests/Manager/Makefile.am:39: Libtool library used but
>> `LIBTOOL' is undefined
>> src/lib/rtm/tests/Manager/Makefile.am:39:   The usual way to define
>> `LIBTOOL' is to add `LT_INIT'
>> src/lib/rtm/tests/Manager/Makefile.am:39:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> src/lib/rtm/tests/Manager/Makefile.am:39:   If `LT_INIT' is in
>> `configure.ac', make sure
>> src/lib/rtm/tests/Manager/Makefile.am:39:   its definition is in aclocal's
>> search path.
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50: Libtool library used but
>> `LIBTOOL' is undefined
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   The usual way to define
>> `LIBTOOL' is to add `LT_INIT'
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   to `configure.ac' and
>> run `aclocal' and `autoconf' again.
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   If `LT_INIT' is in
>> `configure.ac', make sure
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   its definition is in
>> aclocal's search path.
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42: Libtool library used but
>> `LIBTOOL' is undefined
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   The usual way to define
>> `LIBTOOL' is to add `LT_INIT'
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   to `configure.ac' and
>> run `aclocal' and `autoconf' again.
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   If `LT_INIT' is in
>> `configure.ac', make sure
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   its definition is in
>> aclocal's search path.
>> Makefile.am: required file `./INSTALL' not found
>> Makefile.am:   `automake --add-missing' can install `INSTALL'
>> k-okada ＠ kokada-t430s:/tmp/OpenRTM-aist$ automake --add-missing
>> configure.ac: no proper invocation of AM_INIT_AUTOMAKE was found.
>> configure.ac: You should verify that configure.ac invokes
>> AM_INIT_AUTOMAKE,
>> configure.ac: that aclocal.m4 is present in the top-level directory,
>> configure.ac: and that aclocal.m4 was recently regenerated (using
>> aclocal).
>> configure.ac:73: installing `./install-sh'
>> examples/AutoTest/Makefile.am:76: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/AutoTest/Makefile.am:76:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> examples/AutoTest/Makefile.am:76:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> examples/AutoTest/Makefile.am:76:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/AutoTest/Makefile.am:76:   its definition is in aclocal's search
>> path.
>> examples/AutoTest/Makefile.am: installing `./depcomp'
>> /usr/share/automake-1.11/am/depend2.am: am__fastdepCXX does not appear in
>> AM_CONDITIONAL
>> /usr/share/automake-1.11/am/depend2.am:   The usual way to define
>> `am__fastdepCXX' is to add `AC_PROG_CXX'
>> /usr/share/automake-1.11/am/depend2.am:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> /usr/share/automake-1.11/am/depend2.am: AMDEP does not appear in
>> AM_CONDITIONAL
>> /usr/share/automake-1.11/am/depend2.am:   The usual way to define `AMDEP'
>> is to add one of the compiler tests
>> /usr/share/automake-1.11/am/depend2.am:     AC_PROG_CC, AC_PROG_CXX,
>> AC_PROG_CXX, AC_PROG_OBJC,
>> /usr/share/automake-1.11/am/depend2.am:     AM_PROG_AS, AM_PROG_GCJ,
>> AM_PROG_UPC
>> /usr/share/automake-1.11/am/depend2.am:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> examples/Composite/Makefile.am:22: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/Composite/Makefile.am:22:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> examples/Composite/Makefile.am:22:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> examples/Composite/Makefile.am:22:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/Composite/Makefile.am:22:   its definition is in aclocal's search
>> path.
>> examples/ConfigSample/Makefile.am:22: Libtool library used but `LIBTOOL'
>> is undefined
>> examples/ConfigSample/Makefile.am:22:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> examples/ConfigSample/Makefile.am:22:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> examples/ConfigSample/Makefile.am:22:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/ConfigSample/Makefile.am:22:   its definition is in aclocal's
>> search path.
>> examples/SeqIO/Makefile.am:22: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/SeqIO/Makefile.am:22:   The usual way to define `LIBTOOL' is to
>> add `LT_INIT'
>> examples/SeqIO/Makefile.am:22:   to `configure.ac' and run `aclocal' and
>> `autoconf' again.
>> examples/SeqIO/Makefile.am:22:   If `LT_INIT' is in `configure.ac', make
>> sure
>> examples/SeqIO/Makefile.am:22:   its definition is in aclocal's search
>> path.
>> examples/SimpleIO/Makefile.am:22: Libtool library used but `LIBTOOL' is
>> undefined
>> examples/SimpleIO/Makefile.am:22:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> examples/SimpleIO/Makefile.am:22:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> examples/SimpleIO/Makefile.am:22:   If `LT_INIT' is in `configure.ac',
>> make sure
>> examples/SimpleIO/Makefile.am:22:   its definition is in aclocal's search
>> path.
>> examples/SimpleService/Makefile.am:80: Libtool library used but `LIBTOOL'
>> is undefined
>> examples/SimpleService/Makefile.am:80:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> examples/SimpleService/Makefile.am:80:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> examples/SimpleService/Makefile.am:80:   If `LT_INIT' is in
>> `configure.ac', make sure
>> examples/SimpleService/Makefile.am:80:   its definition is in aclocal's
>> search path.
>> src/ext/ec/artlinux/Makefile.am:19: Libtool library used but `LIBTOOL' is
>> undefined
>> src/ext/ec/artlinux/Makefile.am:19:   The usual way to define `LIBTOOL' is
>> to add `LT_INIT'
>> src/ext/ec/artlinux/Makefile.am:19:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> src/ext/ec/artlinux/Makefile.am:19:   If `LT_INIT' is in `configure.ac',
>> make sure
>> src/ext/ec/artlinux/Makefile.am:19:   its definition is in aclocal's
>> search path.
>> src/ext/ec/rtpreempt/Makefile.am:17: Libtool library used but `LIBTOOL' is
>> undefined
>> src/ext/ec/rtpreempt/Makefile.am:17:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> src/ext/ec/rtpreempt/Makefile.am:17:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> src/ext/ec/rtpreempt/Makefile.am:17:   If `LT_INIT' is in `configure.ac',
>> make sure
>> src/ext/ec/rtpreempt/Makefile.am:17:   its definition is in aclocal's
>> search path.
>> src/ext/sdo/observer/Makefile.am:74: Libtool library used but `LIBTOOL' is
>> undefined
>> src/ext/sdo/observer/Makefile.am:74:   The usual way to define `LIBTOOL'
>> is to add `LT_INIT'
>> src/ext/sdo/observer/Makefile.am:74:   to `configure.ac' and run `aclocal'
>> and `autoconf' again.
>> src/ext/sdo/observer/Makefile.am:74:   If `LT_INIT' is in `configure.ac',
>> make sure
>> src/ext/sdo/observer/Makefile.am:74:   its definition is in aclocal's
>> search path.
>> src/lib/rtm/Makefile.am:37: Libtool library used but `LIBTOOL' is
>> undefined
>> src/lib/rtm/Makefile.am:37:   The usual way to define `LIBTOOL' is to add
>> `LT_INIT'
>> src/lib/rtm/Makefile.am:37:   to `configure.ac' and run `aclocal' and
>> `autoconf' again.
>> src/lib/rtm/Makefile.am:37:   If `LT_INIT' is in `configure.ac', make sure
>> src/lib/rtm/Makefile.am:37:   its definition is in aclocal's search path.
>> src/lib/rtm/idl/Makefile.am:19: ORB_IS_RTORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:44: ORB_IS_TAO does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:48: ORB_IS_OMNIORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:52: ORB_IS_MICO does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:56: ORB_IS_ORBIX does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:60: ORB_IS_ORBACUS does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:64: ORB_IS_ORBIT2 does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:74: ORB_IS_RTORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:190: ORB_IS_RTORB does not appear in
>> AM_CONDITIONAL
>> src/lib/rtm/idl/Makefile.am:188: Libtool library used but `LIBTOOL' is
>> undefined
>> src/lib/rtm/idl/Makefile.am:188:   The usual way to define `LIBTOOL' is to
>> add `LT_INIT'
>> src/lib/rtm/idl/Makefile.am:188:   to `configure.ac' and run `aclocal' and
>> `autoconf' again.
>> src/lib/rtm/idl/Makefile.am:188:   If `LT_INIT' is in `configure.ac', make
>> sure
>> src/lib/rtm/idl/Makefile.am:188:   its definition is in aclocal's search
>> path.
>> src/lib/rtm/tests/CORBA_SeqUtil/Makefile.am:32: ORB_IS_ORBIT2 does not
>> appear in AM_CONDITIONAL
>> src/lib/rtm/tests/Manager/Makefile.am:39: Libtool library used but
>> `LIBTOOL' is undefined
>> src/lib/rtm/tests/Manager/Makefile.am:39:   The usual way to define
>> `LIBTOOL' is to add `LT_INIT'
>> src/lib/rtm/tests/Manager/Makefile.am:39:   to `configure.ac' and run
>> `aclocal' and `autoconf' again.
>> src/lib/rtm/tests/Manager/Makefile.am:39:   If `LT_INIT' is in
>> `configure.ac', make sure
>> src/lib/rtm/tests/Manager/Makefile.am:39:   its definition is in aclocal's
>> search path.
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50: Libtool library used but
>> `LIBTOOL' is undefined
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   The usual way to define
>> `LIBTOOL' is to add `LT_INIT'
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   to `configure.ac' and
>> run `aclocal' and `autoconf' again.
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   If `LT_INIT' is in
>> `configure.ac', make sure
>> src/lib/rtm/tests/ManagerServant/Makefile.am:50:   its definition is in
>> aclocal's search path.
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42: Libtool library used but
>> `LIBTOOL' is undefined
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   The usual way to define
>> `LIBTOOL' is to add `LT_INIT'
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   to `configure.ac' and
>> run `aclocal' and `autoconf' again.
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   If `LT_INIT' is in
>> `configure.ac', make sure
>> src/lib/rtm/tests/ModuleManager/Makefile.am:42:   its definition is in
>> aclocal's search path.
>> Makefile.am: installing `./INSTALL'
>> k-okada ＠ kokada-t430s:/tmp/OpenRTM-aist$ ./configure
>> ./configure: line 2192: syntax error near unexpected token `dist-bzip2'
>> ./configure: line 2192: `AM_INIT_AUTOMAKE(dist-bzip2 tar-pax)'
>>
>> _______________________________________________
>> openrtm-users mailing list
>> openrtm-users ＠ openrtm.org
>> http://www.openrtm.org/mailman/listinfo/openrtm-users
>>
>
>
> _______________________________________________
> openrtm-users mailing list
> openrtm-users ＠ openrtm.org
> http://www.openrtm.org/mailman/listinfo/openrtm-users
>